40 KN
30 mm
40 mm
Figure 1
2. The 50-mm- diameter rubber rod (see Figure 2) is place in a hole with rigid,
lubricated walls. There is no clearance between the rod and the sides of the
hole. Determine the change in the length of the rod when the 8-KN load is
applied. Use E= 40 MPa and v= 0.45 for the rubber.
8k
50mm -
300mm
Figure 2
30 mm
40 mm
Figure 1
2. The 50-mm- diameter rubber rod (see Figure 2) is place in a hole with rigid,
lubricated walls. There is no clearance between the rod and the sides of the
hole. Determine the change in the length of the rod when the 8-KN load is
applied. Use E= 40 MPa and v= 0.45 for the rubber.
8k
50mm -
300mm
Figure 2
Read more
5 mo
Only people mentioned by go_668d8199c0e1d in this post can reply
